5 thoughts on “DHW Heat Exchanger removal – 95 – My DIY Garage Build HD Time Lapse

  • December 7, 2012 at 2:57 am
    Permalink

    Hang in there man…..you will figure it out!

    Reply
  • December 28, 2012 at 4:09 am
    Permalink

    DIY,costs alot of money and not always right.

    Reply
  • October 13, 2013 at 8:37 am
    Permalink

    The experienced gained is worth the price paid in failure. Never give up.

    Reply
  • October 14, 2013 at 5:27 pm
    Permalink

    That’s a good way to look at it. Personally I love failing…you can
    succeed much faster with a good healthy failure rate. :)

    Reply
  • January 9, 2014 at 6:36 am
    Permalink

    looks like you have four loops, isolate them with flow setters and find the
    one that doesn’t hold pressure, then just turn hot water back on to that
    circuit, rent a thermal imaging camera and scan your floor, you’ll see big
    (like2’x2′) hot spot where piping burst on you, bust concrete and fix it
    with a real coupling, not shark bite; and you have your loop back in
    business. Or if you don’t want to bust the floor, just don’t hook up that
    loop to your manifold.

    Reply

Leave a Reply to kenneth g reid Cancel reply